Permanent fix for Tesla Model S Radiator Air Louvre Errors

12

October, 2026

Tesla | Louvres | 3D Print

Struggling with THC_w0134_radRightShutrNoFeedbk and THC_w0130_radLeftShutrNoFeedbk? This is a very common issue on the Tesla Model S and this is the permanent fix.

The errors are usually caused by the original flap breaking due to weak design. My redesign is a 1:1 copy - but with a stronger core and a pin that runs down it causing it to be a lot stronger.

I know that there are someone selling this kit for 150 EUR and that is quite crazy if you ask me. I am providing these completely for free, so if you would like to show appreciation for the effort that went into this you can do so here: http://paypal.me/vegarhenriksen <3

Here is the download for the files:
https://www.printables.com/model/1873971-tesla-model-s-radiator-louvres-air-flaps-permanent

If for some reason you have this issue but your flaps are intact it might be the actuators. These can be bought from AliBaba here:
https://www.alibaba.com/x/1lBHjUP?ck=pdp

If the AliBaba link doesn't work, the part number is 110485402

Google Sites

Report abuse